What are the factors causing motor overheating during conveyor operation?

(1) Poor heat dissipation conditions;

(2) Overloaded working hours are too long;

(3) It is possible that the motor bearings are damaged;

(4) Frequent activation;

(5) Voltage too low;

(6) The touch sensor inside the magnetic actuator has poor touch.

Under what circumstances is it simple to present the situation where the bottom chain exits the groove and the scraper chain does not work?

(1) The scraper conveyor equipment is uneven;

(2) Excessive wear of the chute;

(3) Lack of scraper or severe bending of scraper;

(4) The tension between the two chains is inconsistent.

What maintenance equipment should be installed on the 3 belt conveyors?

Maintenance equipment such as speed maintenance, anti-skid, anti deviation, belt breakage, and full storage should be installed. When two conveyors are running in series, interlocking equipment should be installed.


What preparations should a belt conveyor driver make before driving?

(1) Carefully check whether the bolts of the transmission equipment, motor, reducer, hydraulic coupling and other parts of the conveyor are completely tightened, whether there is any oil leakage or seepage, and whether the oil level is normal;

(2) Check whether the cleaner and various maintenance are reliable and normal;

(3) Check if the tension of the conveyor belt is appropriate, if the conveyor belt joints are outstanding, if there are any hard objects on the conveyor belt that may harm it, and if the conveyor belt is not blocked;

(4) Check if all guide rollers, drive rollers, and upper and lower rollers are complete, secure, and sturdy;

(5) Check if the fire-fighting facilities are complete;

(6) Check whether the civilized production environment is outstanding, and whether various pipelines are kneaded or damaged;

(7) Check if the communication and signal systems are functioning properly.

Article organization: foshan assembly line www.zs-chsb.com