2024-08-03 461
The anti reverse device of the bucket elevator is installed on the shaft of the drive mechanism of the bucket elevator, and a anti reverse device is always installed to prevent the reverse operation o
2024-08-03 421
There are three methods for unloading materials from the hopper of a bucket elevator: centrifugal, gravity, and mixing. The type of unloading method depends on the speed, radius, and size of the hoppe
2024-08-02 377
As a commonly used lifting equipment deployment, bucket elevator has been widely used and classified according to industry requirements. Based on the transmission layout, it can be divided into:(1).
2024-08-02 380
The maintenance and upkeep skills of bucket elevators: The most frightening thing for skilled personnel when repairing bucket elevators is the replacement of the bucket chain, especially when the elev
2024-08-01 385
Friends who operate bucket elevators must also encounter some problems during use, among which bearing problems are quite common. Next, the editor will share with us which factors are prone to bearing
2024-08-01 382
Chain plate conveyor is suitable for low-speed, heavy-duty, and high-temperature conditions. Compared with gears, it can be used in situations where the two axis bases are far apart. Gears are transmi
2024-07-31 380
The high-speed brake of the bucket elevator does not participate in the starting, running, and stopping process of the elevator, but plays a role in stopping the machine's speed during safe braki
2024-07-31 386
The bucket elevator should pay attention to insulation resistance:The motor of the bucket elevator should be regularly inspected and repaired, and the electric oil drum pump should be regularly inspec
2024-07-30 357
1. During transportation and storage, the adhesive tape should be kept clean and avoid direct sunlight or exposure to rain and snow. It should also avoid contact with substances such as acids, alkalis
2024-07-30 373
Folding device request1. The bucket elevator must be firmly installed on a solid concrete foundation. The surface of the concrete foundation should be flat and level to ensure the bucket elevatorAfte