2024-08-07 26
The method of handling the venue. The quality management dashboard can alert relevant quality issues on site, so that anyone can timely grasp the quality problems on site, and quickly formulate and im
2024-08-07 27
The use of spiral lifting machines (feed conveyors) has become very widespread in feed mills, which not only facilitates material transportation, saves time and effort, improves work compliance, but
2024-08-06 27
1. The scope of promotion is broad. This type of lifting machine has fewer requirements for the type, characteristics, and block size of materials. Not only can it lift materials that are usually pow
2024-08-06 32
1. Low driving power, accepting inflow feeding, induction unloading, and large capacity hopper type deployment. There is almost no phenomenon of material return or excavation during material promotio
2024-08-05 30
What are the effects of specific area and sulfur roughness in cement?The larger the surface area, the finer the cement. Cement that is too fine can easily cause cracks! And absorb external additives!
2024-08-05 28
When starting the main motor, the power is transmitted from the motor rotor to the high-speed shaft of the reducer through a low-speed coupling. After two-stage gear transmission for deceleration, the
2024-08-04 31
The selection or manufacturing of a winch should be based on the requirements of parameters such as lifting capacity, lifting height, and lifting speed in the quick solution. The ratio of the diameter
2024-08-04 26
The anti reverse device of the bucket elevator is located on the shaft of the drive mechanism of the bucket elevator, and a anti reverse device is installed every time to prevent the reverse operation
2024-08-03 30
The anti reverse device of the bucket elevator is installed on the shaft of the drive mechanism of the bucket elevator, and a anti reverse device is always installed to prevent the reverse operation o
2024-08-03 24
There are three methods for unloading materials from the hopper of a bucket elevator: centrifugal, gravity, and mixing. The type of unloading method depends on the speed, radius, and size of the hoppe