What should be noted for the requirements of chain plate conveyor:
1、 Cannot park or start when fully loaded.
2、 Before using the transport machine, it is necessary to check whether the working parts, tape buckles, and load-bearing equipment are normal, and whether the protective equipment is complete. The tension of the tape must be adjusted to an appropriate level before starting.
3、 The belt conveyor should be started with no load. Wait until the work is normal before feeding. Stop feeding before driving.
4、 When the rare platform conveyor is operated in series, it should be started sequentially from the unloading end. Only after everything is working properly can the material be fed in.
5、 When there is a phenomenon of tape deviation during operation, the vehicle should be parked and adjusted, and the use should not be forced to avoid wear on the edges and adding load.
6、 The working environment and the temperature of the delivered materials shall not exceed 50 ℃ and shall not be lower than -10 ℃. Materials containing acidic or alkaline oils and organic solvents shall not be transported.
7、 Stop pedestrians or passengers on the conveyor belt.
8、 It is necessary to stop feeding before parking, and wait until all the materials on the belt are unloaded before parking.
9、 It is necessary for the motor of the transport machine to have good insulation. Do not pull or drag the cables of the mobile conveyor randomly. The electric motor should be firmly grounded.
10、 Do not pull the belt by hand when it slips to avoid accidents.

The article comes from: http://www.zs-chsb.com/