Linear transmission system:
The transmission equipment is mainly composed of an aluminum alloy transmission equipment beam (45-105mm), which guides the plastic chain plate for flexible transmission. The transport chain plate moves on a low conflict plastic slider. The transported goods are directly loaded onto the transport chain or positioning plate. The guardrail located next to it ensures that the goods remain within the track. Select a drip tray under the trajectory of the transmission equipment to ensure that the liquid is not shallow on the ground.
Drive equipment and center wheel
Several driving equipment can be used to drag the transmission equipment chain:
The end drive device tightens the chain from one end of the transmission device. The transport chain returns from the bottom edge of the beam through a central wheel located at the other end.
At some central points of the transmission equipment, there are central drive devices equipped with central wheels at both ends.
If the return of the transport chain from the bottom is not ideal or possible, chain driven equipment can be used.
Another alternative for light loads is the horizontal reversal drive device, which is particularly suitable for peak shaped cumulative transmission equipment.
Elbow
With the help of elbow units, directional changes can be made:
By using horizontal wheel bends, the conflict force can be minimized, as the twisting force there is borne by the wheels.
For large diameter horizontal elbows, horizontal general elbows are a suitable choice.
By using a straight general bend or (if desired to change direction by 90 °) a center wheel bend device, a straight direction change can be made.
Guardrail equipment
It is necessary for goods on transmission equipment to pass through guardrails:
Guardrails are used to maintain goods and prevent them from falling from the side of the transmission equipment. The guardrail bracket ensures accurate positioning of the guardrail.
In the straight direction, the forward baffle is used to maintain the product and prevent it from falling.
Transmission equipment support
The components used for transmitting equipment support seats include:
Various shapes of footrests
Supporting beams with a cross-sectional size of 80mm * 80mm
Connecting the transmission equipment with the beam support bracket of the supporting beam
This article comes from: http://www.zs-chsb.com/